Wedlon Automation Co., Ltd.

Plastic Granulator (GP-150R, GP-200R)

Fri, 5 Jul 2013 08:12:22 +0000

The Powerful Plastic Granulator is major for crushing the various materials "plastic. rubber . wood. Chinese herb. Tea stem. paper. glass .feed . runner and Sprue etc."

Features

Strong structure designed body.
Faster cutter replacement, easy cleaning allows rapid screen changing.
Size of crushed granules adjustable depends on screen changed. (From Ø2, Ø3... Ø15mm)
Rotor knives with exceptional efficiency cutting angle designed that with least vibration and minimized powder yield.
Built-in emergency safety switch, allows automatic stopping, when hopper and screen base is being opened.
Special designs made to order for meeting clients need.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	GP-150R	GP-200R
Power	1 ~ 2 HP	2 ~ 5 HP
Inlet Size	150 x 160 mm	200 x 240 mm
Rotating Diameter	Ø120 mm	Ø240 mm
R.P.M	320 ~450 rpm	480 ~ 560 rpm
Rotary Cutter	3 pcs	3 pcs
Stationary Cutter	2 pcs	2 pcs
Machine Weight	120 Kg	250 Kg
Machine Size	800 x 450 x 850 mm	1100 x 480 x 1,250 mm
Capacity	100 ~ 150 Kg/hr	125 ~ 200 Kg/hr
Contents	20 Kg	35 Kg

Vertical Type Blender (MVT-Series)

Fri, 5 Jul 2013 08:12:22 +0000

Vertical Type Blender is major for blending rubber, plastic virgin material, recycle material, colorant and masterbatches..

Vertical Type Blending Machine, turbulence produced by special design blending blade, high-speed mixing in all directions.

Features

Turbulence produced by special design blending blade high-speed mixing in all directions.
Integrated polish inside and outside, smooth surface no left over.
Built-in emergancy safety switch,allows automatic stopping,when cover is being opened.
Attaches the timer installment.
Buyer's Label Offered
OEM/ODM Product
Branded Product

Specification Table

Model	MVT-50	MVT-100	MVT-150	MVT-200	MVT-300
Power	3 HP	5 HP	7.5 HP	10 HP	15HP
Max Capacity	50 kg	100 kg	150 kg	220 kg	300 kg
Machine Weight	230 kg	320 kg	350 kg	420 kg	600 kg
Machine Size	900 x 800 x 1170 (mm)	1090 x 950 x 1270 (mm)	1120 x 1000 x 1380 (mm)	1180 x 1110 x 1570 (mm)	1300 x 1300 x 1750 (mm)

Sun Type Mixer (MST Series)

Fri, 5 Jul 2013 08:12:22 +0000

Sun Type Mixing Machine is major for blending rubber, plastic virgin material, recycle material, colorant and masterbatches..

Sun Type Mixing Machine, the blending barrel is cone shape, mixing raw materials by slowly rolling.

Sun Type Mixing Machine, maxing well by affixing interfering blade.

Features

Entire closed-chamber rotating mixing.
Large feeding inlet at upper, proper exhausting outlet at lower part.
Integrated polish inside and outside, smooth surface no leftover
Attaches the timer installment
Buyer's Label Offered
OEM/ODM Product
Branded Product

Specification Table

Model	MST-10	MST-25	MST-50	MST-100	MST-150	MST-200
Power	0.5 HP	0.5 HP	0.5 HP	1 HP	2HP	2HP
Contents	10 kg	25 kg	50 kg	100 kg	150kg	200kg
R.P.M.	30 rpm	30 rpm	30 rpm	30 rpm	30rpm	30rpm
Machine Weight	80 kg	100 kg	120 kg	180 kg	190kg	210kg
Machine Size	580 x 710 x 900mm	700 x 750 x 1,200mm	820 x 950 x 1,450mm	1,200 x 1,100 x 1,650mm	1700 x1360 x1850mm	1900 x1450 x2010mm

Horizontal Type Mixer (MHT Series)

Fri, 5 Jul 2013 08:12:22 +0000

Horizontal Type Mixing Machine is major for blending rubber, plastic virgin material, recycle material, colorant and masterbatches..

Horizontal Type Mixing Machine, the blending barrel is U shape, screw blending blade mix a great quantity of raw materials slowly spirally.

Horizontal Type Mixing Machine, affixing heating piece for drying raw material.

Features

Entire closed-chamber rotating mixing.
Large feeding inlet at upper, proper exhausting.
Integrated polish inside, smooth surface no leftover
Attaches the timer installment
Buyer's Label Offered

Specification Table

Model	MHT-100	MHT-200	MHT-300	MHT-500	MHT-1000	MHT-1500	MHT-2000
Power	3 HP	5 HP	7.5 HP	7.5~10 HP	10 HP	15 HP	20 HP
Contents	100 Kg	200 Kg	300 Kg	500 Kg	1000 Kg	1500 Kg	2000 Kg
R.P.M.	30 rpm	30 rpm	30 rpm	30rpm	30 rpm	30 rpm	30 rpm
Machine Weight	260 Kg	320 Kg	450 Kg	780 Kg	920 Kg	1150 Kg	1380 Kg
Machine Size	1680x 600x 1,230 mm	2150x 675x 1,350 mm	2480x 825 x 1,600 mm	2500 x 1000 x 1,500 mm	2600x 1200x 1,500 mm	2800x 1400x 1,800 mm	3800 x 1650 x 2,200 mm

Small Single Layer (DP-S)

Fri, 5 Jul 2013 08:12:22 +0000

Power pollution is not only aim in the environment; it results in coking, spot and others problem happened. DP series is focus on separate the powder and granules, it risen up the quality, reduce defective and a peak of saving resource, it is special for transparent material and white material identify the consequence.

Features

Separate the powder and granules.
Solve the coking, spot and others problem in processing.
Rise up the quality and reduce defective rate.
Screen with stainless steel, easy clean and operation, disassembled
Man power saving
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	DP-S
Screen Layer	3pcs
Power	1/4 HP
Machine weight	85 Kg
Machine size	900 x 580 x 1,350 mm
Capacity	200-250 Kg/hr
Contents	25 Kg

De-Powder Machine(Three Layers) (DP-L-3)

Fri, 5 Jul 2013 08:12:22 +0000

Features

Separate the powder and granules.
Solve the coking, spot and others problem in processing.
Rise up the quality and reduce defective rate.
Screen with stainless steel, easy clean and operation, disassembled
Man power saving
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	DP-L-3
Screen Layer	3pcs
Power	1/4 HP
Machine weight	85Kg
Machine size	900 x 580 x 1350 mm
Capacity	200 - 250 Kg/hr
Contents	25Kg

De-Powder Machine(Single Layer) (DP-L-1)

Fri, 5 Jul 2013 08:12:22 +0000

Powder pollution is not only aim in the environment; it results in coking, spot and others problem happened. DP series is focus on separate the powder and granules, it risen up the quality, reduce defective and a peak of saving resource, it is special for transparent material and white material identify the consequence.

Features

Separate the powder and granules.
Solve the coking, spot and others problem in processing.
Rise up the quality and reduce defective rate.
Screen with stainless steel, easy clean and operation, disassembled
Man power saving
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	DP-L-1
Screen Layer	1pcs
Power	1/4 HP
Machine weight	55Kg
Machine size	900 x 550 x 1150 mm
Capacity	200 - 250 Kg/hr
Contents	25Kg

Proportional Mixer (PM Series)

Fri, 5 Jul 2013 08:12:22 +0000

Matching plastic molding injection machine, blow molding machine, extruded machine and etc. be on line instant recycle by proportional mixing scale.

Features

Dual-timer control suitable for proportional mixing of two kinds materials.
Multi-purpose crushing: crushed by the machine with material proportionally mixed, crushed by the machine with central feeding material proportionally mixed, new and used materials proportionally mixed.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

MODEL	PM-38	PM-50
Tube diameter	φ38mm	φ50mm
Capacity	300 Kg/hr	500 Kg/hr
Pressed air	4-5 Kg/cm'G	4-5 Kg/cm'G
Machine size	330 x 150 x 150 mm	330 x 150 x 150 mm

large dust-collect tank (TDC-38 / TDC-50)

Fri, 5 Jul 2013 08:12:22 +0000

The main function of the special large dust collector is filtering the air before delivering on to the motor during its sucking process. In the meantime, it also collect the powder of the raw material.

Features

Special large dust collector has a huge storage capacity. It can be installed outside of the door for cleaning to avoid the pollution of the machine and indoor.

Specification Table

Machine Type	Diameter	Capacity	Machine Size
TDC-38	Ø38 mm	15L	300 * 300 * 300 mm
TDC-50	Ø50 mm	15L	300 * 300 * 300 mm

Auto Suck Machine (ALC-1)

Fri, 5 Jul 2013 08:12:22 +0000

Auto loader is used for loading plastic resin to hopper dryer or plastic injection molding machine automatically.

Features

Exclusive de-powdered type suction machine.
High efficiency super-strong sucking function.
Integrated large stainless steel material storage tank.
Extra large dust-collect tank, doubled storage contents cleanable outdoors separately to avoid polluting. machines and work place.
Reversible net cleaning.
Material shortage warning device equipped.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

MODEL	ALC-1
Conveying	200 kg/hr
Conveying length	12m
Power	1.3 HP
Machine weight	45 Kg
Motor Type	1 Phase carbon brush type

Auto Suck Machine (ALB-2, ALB -3, ALB-5,ALB-7.5)

Fri, 5 Jul 2013 08:12:22 +0000

Auto loader is used for loading plastic resin to hopper dryer or plastic injection molding machine automatically.

Features

Exclusive de-powdered type suction machine.
High efficiency super-strong sucking function.
Integrated large stainless steel material storage tank.
Extra large dust-collect tank, doubled storage contents cleanable outdoors separately to avoid polluting. machines and work place.(optional)
Reversible net cleaning.
Material shortage warning device equipped.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

MODEL	ALB-2	ALB-3	ALB-5	ALB-7.5
Conveying	300 kg/hr	450 kg/hr	550 kg/hr	650kg/hr
Conveying length	12m	15m	30m	40m
Power	2Hp	3 Hp	5 Hp	7.5Hp
Machine weight	58 Kg	71 Kg	103 Kg	117Kg
Motor Type	3 Phase	3 Phase	3 Phase	3Phase

Mold Temperature Controller (TOH Series)

Fri, 5 Jul 2013 08:12:22 +0000

The oil circulation mold temperature controller is major for controlling the temperature of the mold in the plastic injection molding machine.

Features

The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%.
Medium circulation pipe with stainless steel.
All series adopting speck pump from Germany.
Circuit beaker.
Motor reverse protective lamp.
Oil shortage protective lamp.
Pump overload protective lamp.
Overheat Thermostat protective lamp.
By-Pass system.
Buzzer.
Inlet temperature digital display gauge.
Phase failure protecter.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	TOH-300(4HP)
Temp. Control Range	60 ~ 300°C
Temp. Control Accuracy	± 1°C
Temp. Control Method	Double proportional integral derivative
Power	3Ø 220V 60Hz (or other)
Heat Transfer Medium	Heat Transfer Oil
Cooling Method	Indirect Cooling
Heating Capacity	24 or 36 Kw
Pump Power	4 HP
Max Pump Flow	100 l/min
Max. Pump Pressure	13 kg/cm²
Expansion Tank Capacity	30 liter
Cooling Water Pipe	1/2"
Circulation Oil Pipe	1"
Machine Size	1,050 x 450 x 1,100 mm
Weight	130 Kg

Mold Temperature Controller-Water Circulation Mold Temperature Controller (TWRD Series)

Fri, 5 Jul 2013 08:12:22 +0000

The Mold Temperature Controller-Water Circulation Mold Temperature Controller is major for controlling the temperature of the mold in the plastic injection molding machine.

Features

The panel control adopted micro, processor (P.I.D.) touch type, easy to operation.
Double micro, processor P.I.D. automatic control, precision high, save electricity over 35%.
Employing Germany "Without seal" magnetic drive pump, durable and not leak.
Medium circulation pie with stainless, reduces ipe block.
Automatic start and exhaust air.
Automatically reduce the temperature after stop pump.
Automatically recover water circulation from the mold.
Application DVD, CD-R, CD and OPTICS, Electronic precise products injection molding.
Running cost low, without pollution, low noise pollution, environmental protection type.
Circuit breaker.
Motor reverse protective lamp.
Water shortage protective lamp.
Pump overload protective lamp.
BY-PASS system.
Buzzer.
Overheat thermostat.
Inlet temperature digital display gauge.
Phase failure protecter.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	TWRD-150(0.75HP)	TWRD-150(1.5HP)
Temp. Control Range	40 ~ 150°C	40 ~ 150°C
Temp. Control Accuracy	± 0.1°C	± 0.1°C
Temp. Control Method	Double proportional integral derivative	Double proportional integral derivative
Power	3Ø 220V 60Hz (or other)	3Ø 220V 60Hz (or other)
Heat Transfer Medium	Water	Water
Cooling Method	Direct Cooling	Direct Cooling
Heating Capacity	8 Kw	8 Kw
Pump Power	0.75 HP	1.5 HP
Max Pump Flow	35 L/min	68 L/min
System Pressure	7.2 kg/cm²	6.8 kg/cm²
Power Supply	9 Kw	10 Kw
Cooling Water Pipe	1/2"	1/2"
Circulation Water Pipe	3/4"	3/4"
Cooling Water Supply	4 kg/cm², 13 L/min	4 kg/cm², 13 L/min
Machine Size	590 x 300 x 660 mm	590 x 300 x 660 mm
Weight	55 Kg	65 Kg

Mold Temperature Controller-Water Circulation Mold Temperature Controller (TWB Series)

Fri, 5 Jul 2013 08:12:22 +0000

The Mold Temperature Controller-Water Circulation Mold Temperature Controller is major for controlling the temperature of the mold in the plastic injection molding machine.

Features

The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%.
Medium circulation pipe with stainless steel.
Automatic star and exhaust air.
Circuit beaker.
Motor reverse protective lamp.
Water shortage protective lamp.
Pump overload protective lamp.
Outlet water pressure gauge.
Overheat thermostat.
By-Pass system.
Buzzer.
Inlet temperature digital display gauge.
Phase failure protecter.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	TWB-150(1HP)	TWB-180(1.5HP)
Temp. Control Range	40 ~ 150°C	40 ~ 180°C
Temp. Control Accuracy	± 1°C	± 1°C
Temp. Control Method	Double proportional integral derivative	Double proportional integral derivative
Power	3Ø 220V 60Hz (or other)	3Ø 220V 60Hz (or other)
Heat Transfer Medium	Water	Water
Cooling Method	Indirect Cooling	Indirect Cooling
Heating Capacity	8 Kw	8 Kw
Pump Power	1 HP	1.5 HP
Max Pump Flow	60 l/min	68 l/min
System Pressure	6 kg/cm²	10 kg/cm²
Power Supply	9 Kw	10 Kw
Cooling Water Pipe	1/2"	1/2"
Circulation water Pipe	3/8" x 4" (or other)	3/8" x 4" (or other)
Machine Size	700 x 350 x 880 mm	700 x 350 x 880 mm
Weight	80 Kg	95 Kg

Chilling machine (CW Series)

Fri, 5 Jul 2013 08:12:22 +0000

The Chilling Machine-Cooling Machine is major for cooling the mold of plastic injection molding machine.

Features

Employing all-new, imported compressor, complete with all-new import certificates.
Employing superb imported components, with longer terms of service.
High efficiency evaporator and cooling condenser in use, to help save no less than 30% of your power rates.
High precision digital display, for the temperature control.
Employing two sets of compressors which can be used jointly or independent. (Over C-10)
Complete with safety protection and error indication system.
Micro-processing controller, easy operation.
The weld of brass pipe is non-exidization (nitrogen flushing).
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	UNIT	CW-2	CW-5	CW-7	CW-10	CW-15	CW-20	CW-25	CW-30	CW-40	CW-50	CW-60
Control range	°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C
Power		3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)
Cooling capacity	BTU/HR (60HZ/50HZ)	24,000/19,700	60,000/51,700	90,000/74,700	120,000/103,500	180,000/152,800	240,000/202,000	300,000/248,000	360,000/296,000	480,000/398,400	600,000/498,000	720,000/597,600
Comp power	HP	2	5	7-1/2	10 (5 x 2)	15 (7-1/2 x 2)	20 (10 x 2)	25 (12-1/2 x 2)	30 (15 x 2)	40 (20 x 2)	50 (25 x 2)	60 (30 x 2)
Pump power	HP	0.56	0.96	0.96	1.23	1.23	1.9	1.9	2.9	3.7	3.7	3.7
Max. Pump pressure	KG/cm²	2.5	2.5	2.6	2.6	2.8	2.8	4.6	3.8	3.8	3.8	3.8
Max. Pump flow	L/Min	66	150	150	200	200	266	266	266	550	550	550
Max. Power supply	KW	2	4.7	6.5	8.7	12.5	16.9	20.6	25.3	33.6	41	48.6
Tank capacity	Liter	25	75	75	120	120	180	250	250
Chilling water pipe	Inch	3/4	1-1/4	1-1/4	1-1/2	2	2	2-1/2	2-1/2	3	3	3
Cooling water pipe	Inch	3/4	1-1/4	1-1/4	1-1/2	2	2	2-1/2	2-1/2	3	3	3
L x W x H	cm	93 x 60 x 90	123 x 60 x 130	160 x 70 x 154	170 x 70 x 140	170 x 70 x 140	193 x 90 x 175	193 x 90 x 175	193 x 90 x 175	225 x 95 x 158	225 x 95 x 158	265 x 100 x 163
Weight	KG	180	340	420	720	860	1060	1200	1400	1500	1700	1850

Chilling Machine (CA Series)

Fri, 5 Jul 2013 08:12:22 +0000

The Chilling Machine-Cooling Machine is major for cooling the mold of plastic injection molding machine.

Features

Employing all-new, imported compressor, complete with all-new import certificates.
Employing superb imported components, with longer terms of service.
High efficiency evaporator and cooling condenser in use, to help save no less than 30% of your power rates.
High precision digital display, for the temperature control.
Employing two sets of compressors which can be used jointly or independent. (Over C-10)
Complete with safety protection and error indication system.
Micro-processing controller, easy operation.
The weld of brass pipe is non-exidization (nitrogen flushing).
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	UNIT	CA-2	CA-5	CA-7	CA-10	CA-15	CA-20	CA-25	CA-30
Control range	°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C	8°C ~ 30°C
Power		3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)	3φ220V 60HZ (or other)
Cooling capacity	BTU/HR (60HZ/50HZ)	24,000/19,700	60,000/51,700	90,000/74,700	120,000/103,500	180,000/152,800	2400,000/202,000	300,000/248,000	360,000/296,000
Comp power	HP	2	5	7	10 (5 x 2)	15 (7-1/2 x 2)	20 (10 x 2)	25 (12-1/2 x 2)	30 (15 x 2)
Pump power	KW	0.56	0.96	0.96	1.23	1.23	1.9	1.9	2.9
Max. Pump pressure	KG/cm²	2.5	2.5	2.5	2.6	2.6	2.8	2.8	4.6
Max. Pump flow	L/Min	66	150	150	200	200	200	266	266
Max. Power supply	KW	1.9	4.5	6.4	9	1.3	16.5	21	24.8
Tank capacity	Liter	25	50	50	110	175	175	250	250
Chilling water pipe	Inch	3/4	1-1/4	1-1/4	1-1/2	2	2	2-1/2	2-1/2
Cooling water pipe	Inch	3/4	1-1/4	1-1/4		1-1/2	2	2	2-1/2
L x W x H	cm	108 x 60 x 130	125 x 65 x 140	138 x 85 x 147	158 x 85 x 166	211 x 85 x 172	224 x 90 x 172	251 x 113 x 181	273 x 113 x 181
Weight	KG	180	340	420	720	860	1060	1200	1400

Drawer Type Mold Rack (RD2-4H1)

Fri, 5 Jul 2013 08:12:22 +0000

The Drawer Type Mold Rack is major for placing platic mold for convenience.

Features

Reduce mold-locating and change-over time; high speed lifting and lowering therefore saves manual laboring.
Heavy objects like molds & tools can be easily stored, being in good order and saves space.
Each tier of rack can load 1000Kg.
Hoist load 800Kg.
Hoist travels horizontally.
Height of drawer type racks can be freely adjusted.
Units can be connected to limitless lengths. According to site space.
Mold rack is completely K/D format and can be easily and quickly assembled.
Special drawer type mold rack can be ordered.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

MODEL	RD2-4-H1
Load Of Each Tier	1000KG
Load Of Hoist	800KG
Length Of Each Tier	910 MM
Width Of Each Tier	610 MM
Height Of Each Tier	Adjustable
Total Length	Total tiers + 0.1M
Total Width	615 mm
Total Width(with the Hoist)	860 mm
Total Height(without the Hoist)	2000 mm
Total Height(with the Hoist)	2800 mm

Compressed Air Dryer (HA/NA Series)

Fri, 5 Jul 2013 08:12:22 +0000

Compressed Air Dryer is mainly used for removing the moisture from the compressed air.

Features

Installing a Pre-cooler first compressed air enter there for cool compressed air before it enter the evaporator, (HA Series Only has.)
Non-fouling heat exchanger maintain performance heat-exchanger efficiency and low pressure drop for the life of the unit; are fully insulated to preserve cooling effectiveness.
High quality refrigeration controls produce consistent cooling temperatures over a wide range of flow and operating conditions.
Separator maintains high efficiency from no flow to full flow.
Durable condensate drain automatically collects and discharges condensate from the system.
All electrical controls and safety devices to start and protect compressor and fan motor.
Refrigeration system is built under strict quality control procedures by experienced craftsmen and includes all. The filter and over loads necessary to ensure long trouble free service.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

MODEL	5 HA/NA	10 HA/NA	15 HA/NA	20 HA/NA	30 HA/NA	50 HA/NA	75 HA/NA	100 HA/NA
Flow Rate (Nm³/min)	0.6	1.3	1.8	2.8	4.2	7	10.6	14.5
Flow Rate (SCFM)	21	46	64	99	148	247	375	512
Inlet Air Temp.	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)	Working: 80°C(HA) / 45°(NA)
Environment Temp.	Working: 38°C	Working: 38°C	Working: 38°C	Working: 38°C	Working: 38°C	Working: 38°C	Working: 38°C	Working: 38°C
Pressure Dew Point	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C	2 ~ 10 °C
Working Pressure	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²	Working: 7 Kgf/c m²
Refrigerant	R134a	R134a	R134a	R134a	R134a	R134a	R22(R134a)	R22(R134a)
Power Supply	1phase 220v	1phase 220v	1phase 220v	1phase 220v	1phase 220v	1phase 220v	3phase 220/380/440v	3phase 220/380/440v
Compressor Motor (HP)	1/5	1/3	1/2	3/4	1	11/2	2	3
In / Oulet Conn.	1/2"	3/4"	3/4"	1"	11/2"	2"	21/2"	3"
Physical Dimension (mm) Height	460 / 390 mm	600 / 600 mm	650 / 600 mm	760 / 650 mm	750 / 750 mm	770 / 800 mm	1,200 / 1,000 mm	1,200 / 1,000 mm
Physical Dimension (mm) Width	470 / 350 mm	350 / 350 mm	350 / 350 mm	400 / 350 mm	400 / 400 mm	500 / 500 mm	700 / 700 mm	700 / 700 mm
Physical Dimension (mm) Depth	500 / 400 mm	640 / 640 mm	770 / 640 mm	820 / 770 mm	920 / 920 mm	995 / 920 mm	1,270 / 1,270 mm	1,270 / 1,270 mm
Net Weight (Kg)	27 / 22	45 / 45	50 / 45	70 / 60	95 / 90	130 / 105	210 / 160	270 / 220

Injection Molding Robot - Small Traversing Robot (TES Series)

Fri, 5 Jul 2013 07:24:50 +0000

The Injection Molding Robot-small traversing robots are extensively applied to plastic injection molding machine 50T ~ 350T.
The small traversing robots can rapid take out the runners, sprues and finished products from the mold of plastic injection molding machine.
The small traversing robots can achieve factory online automatically system.

Features

Dialog Controller, Easy to Control
- The control system meets CE, SPI and EUROMAP standards, which is compatible with injection molding machines all over the world.
- Remote controller with the LCD display for easy reading. The screen capacity is 100 Chinese characters.
- Choice of English / Chinese displays on screen.
- 16 bit dual CPU provides powerful editing functions for deletion, insertion and replacement.
- The program copy function, in conjunction with the edit and modification function, provides easy program editing and modification.
- 60 sets standard programs combined with 40 sets edit meets requirements for any type of mold.
- Machine Interface Contains: Mold clamp interlock, injection interlock, mold eject interlock, safety door control, product counting and cycle time.
- Specially designed outside mold hold function suits extra high molds and molds with core cylinders. This prevents molds bumping against the robot.
- Middle Platen Confirmation Device (Optional): A safety guard to prevent the middle platen bumping against the robot resulting from incorrect positioning of middle platen.
The traverse stroke is driven by an high performance, frequency change brake motor.
The traverse stroke is controlled by an encoder, providing up to nine points of product release,and controlled directly by the settings of the operation panel.
The machine has an innovative automatic speed slow-down on the vertical stroke for the product and sprue arm when in manual control mode. This will avoid operation error and provide protection for the mole.
The product and sprue arms feature fast pick and slow release, which provide a safer working area.
OEM/ODM Product
Branded Product
Buyer's Label Offered

Specification Table

Model	TES-600 (S/D)(NC1)	TES-700 (S/D)(NC1)	TES-800 (S/D)(NC1)	TES-900 (S/D)(NC1)
Suited For Injection Molding Machine	50 ~ 125 Tons	125 ~ 180 Tons	180 ~ 250 Tons	250 ~ 350 Tons
Power Source	1Ø220V±10%,50/60Hz	1Ø220V±10%,50/60Hz	1Ø220V±10%,50/60Hz	1Ø220V±10%,50/60Hz
Electric Consumption	3A	3A	3A	3A
Air Pressure	5 kg/cm²	5 kg/cm²	5 kg/cm²	5 kg/cm²
Vertical Drive System(Z Axis)	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder
Longitudinal Drive System (Y Axis)	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder	A:Air Cylinder B:Air Cylinder
Traverse Drive System(X Axis)	Frequency Change Motor + Encoder or Servo Motor	Frequency Change Motor + Encoder or Servo Motor	Frequency Change Motor + Encoder or Servo Motor	Frequency Change Motor + Encoder or Servo Motor
Posture Drive System(C Axis)	Air Cylinder	Air Cylinder	Air Cylinder	Air Cylinder
Vertical Stroke (Z Axis)mm	A: 600 / B: 650	A: 700 / B: 750	A: 800 / B: 850	A: 900 / B: 950
Longitudinal Stroke (Y Axis)mm	A: 150 / B: 100	A: 150 / B: 100	A: 250 / B: 150	A: 250 / B: 150
Traverse Stroke (X Axis)mm	1208	1208	1508	1508
Posture Angle (C Axis)	90º	90º	90º	90º
Max. Grip Weight (Jip Weight Included)	3 kg	3 kg	4 kg	4 kg
Air Consumption (AT 5kg/cm²Pressure)	D: 27.7 / S: 15.9	D: 31.9 / S: 18.1	D: 36.9 / S:21.3	D: 40.8 / S: 23.5
Remark	A: Product Arm / B: Sprue Arm	A: Product Arm / B: Sprue Arm	A: Product Arm / B: Sprue Arm	A: Product Arm / B: Sprue Arm

Injection Molding Robot - Large Servo Traverse Type Robot Arm (TEL-SNC3 Series)

Fri, 5 Jul 2013 07:24:50 +0000

Injection Molding Robot - Large Servo Traverse Type Robots are extensively applied to plastic injection molding machine 1800T ~ 3500T.
The large traverse robots can rapid take out the runners, sprues and finished products from the mold of plastic injection molding machine.
The large traverse robots can achieve factory online automatically system.

Features

Advanced Control Functions! Extremely Flexible Program Editing!
- 320×240 colorful screen for easy reading.
- High speed, highly efficient 16Bit CPU Working frequency is 133MHz.
- Servo board and CPU board are single board design for independent change.
- Includes USB interface for changing programs
- Hand Wheel Encoder can be micrometrical adjusted.
- External waiting、Rear pick function and Fast setting function for in-mold pick.
- Stacking function 99×99×99.
- Error record、Change record、System diagnosis、Program editing、Program Simulation、Program copy function.
- Simultaneous reach on axis.
- Fast setting function for manual mold change.
- Micrometric adjustment for delay time.
Features Of Controller
- Suitable for irregular take-out motions for special products, such as hooked products.
- Allows for products stacking up to 99×99×99 points. Once stacking quantity has been reached , an out signal is transferred to conveyor belt. When preforming the first time stacking ,any foreign product existing on the production line will be detected. If the foreign product is not removed during stacking ,stacking motion will stop.
- Provides insert in-mold function, and picks product at a setting position. Once mold opens, the robot picks product and inserts it into a specified position.
- Allows for simultaneous editing of 3 axes positions.
- Module functions provides 16384 commands for program editing and memory function.
- Speed increasing and reducing function. A hand wheel is provided for convenient program editing and simulation.
- In manual mode, operator may use a hand wheel for micrometric position adjustment. This avoids operational error and provides protection for the mold.
- Advanced injection confirmation signal eliminates the problem of robot bumping and clamping against the mold.
- The robot arm can perform inside insert and take-out function at any position inside or outside of mold.
- Remote controller with the LCD display for easy reading. The screen capacity is 260 Chinese or 520 English characters.
- Choice of English/Chinese displays on screen. The control panel is a separated design, allowing for operation control at any position. Machine interlock, safety door control, product counting and cycle time.
- The control system fully meet CE,SPI and EUROMAP international standards, and is compatible with that of any injection molding machine in the world.
Features Of Structure
- Driven by Japanese MITSUBISHI Server Motor combined with rigid rack for stable and vibration-free movement.
- Arms are manufactured from Aluminium alloy, featuring less weight,high durability, and wear-resistance. High stability in fast operation cycles.
- The second step of vertical stroke is transmitted by steel reinforced belt.Simultaneous motions for the first and second strike give fast stroke speed.
- Double linear motion guides that increase loading capacity of arm and service life.
- A large , durable , flexible strip is provided to prevent the electrical wires and air circuit pipes from being damaged .
- All components on this robot are made by modular manufacturing for superior interchangeability.

Specification Table

Model	TEL-2000(SNC3)	TEL-2500(SNC3)	TEL-3000(SNC3)	TEL-3500(SNC3)	TEL-4000(SNC3)
Suited For Injection Molding Machine	1,600 - 1,800 Tons	2,000 - 2,500 Tons	3,000 - 3,500 Tons	3500 Tons as above	3500 Tons as above
Power Source	220V±10%,50/60Hz
Max. Electric Consumption	10A
Air Pressure	6kg/cm²
Drive System	Servo Motor
Take-out stroke(z)	2000	2500	3000	3500	4000
Longitudinal stroke (Y)	1160	1460	1820	2100	2500
Traverse stroke (X)	3120	3600	3600	4000	4300
Posture	90º
Max. Grip Weight (Jip Weight Included)	35 kg			70 kg
Air Consumption (NL/cycle)(preasure 5kg/cm²)	100 L/Min